Customize Parameters [08/2019 - ]
- CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM (w/ Memory) NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
HINT:
The following items can be customized.
- Customizing with the Techstream
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Customize Setting / Entry & Start Smart Key / Access.
- Select the setting by referring to the table below.ENTRY & START SMART KEY / ACCESS
Tester Display Description Default Setting ECU Seat position/Tilt & Telesco memory recall setting This customize function switches the condition of the seat position and Tilt & Telesco memory recall. Possible recall activation parameter "D-door unlock and open by smart system" or "Any door unlock and open with smart system". D Door 0:D Door, 1:Any Door Main body ECU (Multiplex network body ECU)