DTC U0073: Control Module Communication Bus Off; DTC U0100: Lost Communication With ECM/PCM "A"; DTC U0123: Lost Communication With Yaw Rate Sensor Module; DTC U0126: Lost Communication With Steering Angle Sensor Module; DTC U0142: Lost Communication with Body Control Module "B"; DTC U0151: Lost Communication With Restraints Control Module [04/2018 - 08/2021]: Procedure

1. Clear the DTCs.

   Chassis > ABS/VSC/TRAC/EPB > Clear DTCs 

2. Turn the engine switch off.
3. Turn the engine switch on (IG).
4. Enter the following menus: System Select / Health Check.
5. Check for DTCs.

   Result

   Result	Proceed to
   DTCs for related systems are output together with DTC U0073, U0100, U0123, U0126, U0142 or U0151.	A
   U0073, U0100, U0123, U0126, U0142 or U0151 is output	B
   DTCs are not output	C

Result: 

A 

GO TO DIAGNOSTIC TROUBLE CODE CHART (RELATED SYSTEM) 

Result: 

B 

INSPECT CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [04/2018 -] 

Result: 

C 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [04/2018 -]