Typical Enabling Conditions
P10A0: VALVEMATIC SYSTEM TARGET ERROR / SLOW RESPONSE MALFUNCTION FOR VALVEMATIC COLD START STRATEGY
| Monitor runs whenever the following DTCs are not stored |
None |
| All of the following conditions are met |
- |
| Engine coolant temperature |
-20°C (-4°F) or higher |
| Motor activation |
Active |
| Engine speed |
300 rpm or higher |
| Battery voltage |
8 V or higher |
| Cold start conditions* of secondary parameters in VALVEMATIC cold start strategy are met |
- |
P1055: VALVEMATIC SYSTEM TARGET ERROR / SLOW RESPONSE MALFUNCTION
| Monitor runs whenever the following DTCs are not stored |
None |
| All of the following conditions are met |
- |
| Engine coolant temperature |
-20°C (-4°F) or higher |
| Motor activation |
Active |
| Engine speed |
300 rpm or higher |
| Battery voltage |
8 V or higher |
| Cold start conditions* of secondary parameters in VALVEMATIC cold start strategy are not met |
- |
| *: Cold start conditions is all of the following conditions are met |
- |
| Engine coolant temperature |
-10°C (14°F) or higher, and less than 60°C (140°F) |
| Idle |
ON |
| Target valve event angle |
150°CA |