LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2021 >> C-HR LE >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (W/O Canister Pump) - Diagnostic Codes (P0365-P2237) >> SFI SYSTEM (w/o Canister Pump Module) >> DTC P0420: Catalyst System Efficiency Below Threshold (Bank 1) [10/2017 - 12/2021] >> Typical Enabling Conditions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Typical Enabling Conditions

Battery voltage 11 V or higher
Intake air temperature -10°C (14°F) or higher
Engine coolant temperature 75°C (167°F) or higher
Atmospheric pressure 76 kPa (abs) [570 mmHg (abs)] or higher
Idling Off
Engine speed Less than 4000 RPM
Air fuel ratio sensor status Activated
Fuel system status Closed loop
Engine load 10% or higher, and less than 80%
All of the following conditions are met -
1. Mass air flow rate 2.5 gm/sec or more, and less than 40 gm/sec
2. Front catalyst temperature (estimated) 690°C (1274°F) or higher, and less than 840°C (1544°F)
3. Rear catalyst temperature (estimated) 570°C (1058°F) or higher, and less than 800°C (1472°F)