LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2021 >> Corolla XLE >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transaxle System (K313) - Diagnostic Codes & Circuit Tests >> Continuously Variable Transaxle System >> DTC P0705: Transmission Range Sensor Circuit (PRNDL Input) [01/2019 - 11/2022] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P0705: Transmission Range Sensor Circuit (PRNDL Input) [01/2019 - 11/2022]: Description

The park/neutral position switch assembly detects the shift lever position and send signals to the ECM.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
P0705 Transmission Range Sensor Circuit (PRNDL Input) Any of the following conditions are met (2-trip detection logic):
  • 2 or more of the following signals are ON simultaneously for 2 seconds or more*:
    • P, N or NSW input signal
    • R input signal
    • D input signal
    • B input signal
  • P, R, N, D, B and NSW input signals are all OFF simultaneously for 60 seconds or more.
  • Wire harness or connector
  • Park/neutral position switch assembly
  • ECM
Comes on DTC stored
DTC DETECTION CONDITION PATTERNS (P0705*):

  Vehicle Condition
Pattern 1 Pattern 2 Pattern 3 Pattern 4 Pattern 5 Pattern 6
Diagnostic Condition Ignition switch is ON
Battery voltage is 8 V or more
Malfunction Condition NSW input signal is ON - - -
P input signal is ON - - -
R input signal is ON - - - -
N input signal is ON - - - - - -
D input signal is ON - - - -
B input signal is ON - - - -
Duration 2 seconds or more 2 seconds or more 2 seconds or more 2 seconds or more 2 seconds or more 2 seconds or more
Detection Logic 2-trip detection logic 2-trip detection logic 2-trip detection logic 2-trip detection logic 2-trip detection logic 2-trip detection logic
DTC DETECTION CONDITION PATTERNS (P0705*):

  Vehicle Condition
Pattern 7 Pattern 8 Pattern 9 Pattern 10 Pattern 11 Pattern 12
Diagnostic Condition Ignition switch is ON
Battery voltage is 8 V or more
Malfunction Condition NSW input signal is ON - - - - - -
P input signal is ON - - - - - -
R input signal is ON - - -
N input signal is ON - - -
D input signal is ON - - -
B input signal is ON - - -
Duration 2 seconds or more 2 seconds or more 2 seconds or more 2 seconds or more 2 seconds or more 2 seconds or more
Detection Logic 2-trip detection logic 2-trip detection logic 2-trip detection logic 2-trip detection logic 2-trip detection logic 2-trip detection logic

HINT: 

DTC P0705 is stored when any of the above detection patterns is met.