Diagnosis System [12/2019 - ]
- DESCRIPTION
- Power window control system data and Diagnostic Trouble Codes (DTCs) can be read through the vehicle Data Link Connector 3 (DLC3). When the system seems to be malfunctioning, use the GTS to check for malfunctions and perform repairs.
- CHECK DLC3
- Check the DLC3.
Refer to GENERAL INFORMATION [12/2019 - ]
- Check the DLC3.
- INSPECT AUXILIARY BATTERY VOLTAGE
- Measure the auxiliary battery voltage.*1
- Measure the auxiliary battery voltage with the ignition switch off.*2
- *1: for Gasoline Model
- *2: for HV Model
Standard Voltage
11 to 14 V
If the voltage is below 11 V, recharge or replace the auxiliary battery.