Problem Symptoms Table [12/2019 - 09/2020]
HINT:
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
- If any of the following symptoms exist despite no DTCs being output when checking for CAN communication and pre-collision system DTCs, check the suspected areas.
PRE-COLLISION SYSTEM
| Symptom | Suspected Area | Link |
|---|---|---|
| "VSC Turned OFF Pre-Collision Brake System Unavailable" is displayed | VSC turned off | - |
| Electronically controlled brake system (for HV Model) | Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2019 - 11/2023] | |
| Electronically controlled brake system (for Gasoline Model) | Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2019 - 11/2023] | |
| Pre-collision system cannot be disabled (PCS warning light does not illuminate) | Combination meter assembly (Perform Active Test to confirm illumination of indicator) | Refer to DATA LIST / ACTIVE TEST [12/2019 - 10/2022] |
| Meter / gauge system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2019 - ] | |
| Steering pad switch assembly | Refer to REMOVAL [12/2019 - 10/2022] | |
| Combination meter assembly | Refer to REMOVAL [12/2019 - ] |