LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2021 >> Land Cruiser Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Engine Coolant Temperature Sensor >> Removal [08/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [08/2015 - ]: Procedure

  1. REMOVE FRONT FENDER SPLASH SHIELD SUBASSEMBLY RH 

    Refer to PROCEDURE - Step 2

  2. REMOVE FRONT FENDER SPLASH SHIELD SUBASSEMBLY LH 

    Refer to PROCEDURE - Step 1

  3. REMOVE NO. 1 ENGINE UNDER COVER SUBASSEMBLY 

    Refer to PROCEDURE - Step 17

  4. DRAIN ENGINE COOLANT 

    Refer to PROCEDURE - Step 4

  5. REMOVE V-BANK COVER SUBASSEMBLY 

    Refer to PROCEDURE - Step 22

  6. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    GTY588685Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the sensor connector.
    2. Using a 19 mm deep socket wrench, remove the sensor.
    3. Remove the gasket from the sensor.
scientia non olet · About LEMON Manuals