Customize Parameters [08/2015 - ]: Procedure

WARNING: This page is about a different car, the 2020 Toyota Land Cruiser, 2019 Toyota Land Cruiser, 2018 Toyota Land Cruiser, 2017 Toyota Land Cruiser, and 2016 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Customizing with the Techstream

NOTE:

When using the Techstream with the engine switch off to troubleshoot:

Connect the Techstream to the DLC3 and turn a courtesy light switch on and off at 1.5-second intervals until communication between the Techstream and vehicle begins.

Connect the Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the Techstream on.
Enter the following menus: Customize Setting / Door Lock.

Select the setting by referring to the table below.

DOOR LOCK

Display	Default	Content	Setting	Relevant ECU
Unlock Key Twice	ON	Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors.	ON or OFF	Main body ECU (Multiplex network body ECU)
Automatic Door Lock Function	Link Shift	Link Shift: Function that locks all doors when the shift lever is moved out of P, with the engine switch on (IG) and all doors closed. Link Speed: Function that locks all doors when the vehicle speed reaches a certain level.	OFF/Link Shift/Link Speed	Main body ECU (Multiplex network body ECU)
Automatic Door Unlock Function	Link Shift	Link D-door: Function that unlocks the other doors when the driver door is opened within approximately 43 seconds of the engine switch being turned off. Link Shift: Function that unlocks all doors when the shift lever is moved to P from any position other than P with the engine switch on (IG).	OFF/Link D-door/Link Shift	Main body ECU (Multiplex network body ECU)

Customizing with the Multi-display

Turn the engine switch on (IG).
Enter the following menus: SET UP/ Vehicle / Vehicle Customization / Door Lock Settings.

Select the setting by referring to the table below.

Display	Default	Content	Setting	Relevant ECU
Automatic Door Lock	By Shift From P	By Shift From P: Function that locks all doors when the shift lever is moved out of P, with the engine switch on (IG) and all doors closed. By Speed: Function that locks all doors when the vehicle speed reaches a certain level.	By Speed, By Shift From P or Off	Main body ECU (Multiplex network body ECU)
Automatic Door Unlock	By Shift to P	By Driver Door: Function that unlocks the other doors when the driver door is opened within approximately 43 seconds of the engine switch being turned off. By Shift to P: Function that unlocks all doors when the shift lever is moved to P from any position other than P with the engine switch on (IG).	By Shift to P, By Driver Door or Off	Main body ECU (Multiplex network body ECU)
Unlock on Second Key Turn	On	Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors.	On or Off	Main body ECU (Multiplex network body ECU)