Inspection [08/2015 - ]: Procedure
- INSPECT PRE-COLLISION CITY BUZZER
- Apply battery voltage and check the operation of the pre-collision city buzzer according to the table below.
OK
Measurement Condition Specified Condition Battery positive (+) → Terminal 2 (IG1)
Battery negative (-) → Terminal 1 (BZ)Pre-collision city buzzer sounds If the result is not as specified, replace the pre-collision city buzzer.
TEXT IN ILLUSTRATION*a Component without harness connected
(Pre-collision City Buzzer)
- Apply battery voltage and check the operation of the pre-collision city buzzer according to the table below.