LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2021 >> Prius LE AWD-e >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Smart Key System (Keyless Start) - Diagnostics - Introduction >> SMART KEY SYSTEM (for Start Function) >> DTC Check / Clear [11/2015 - ] >> DTC Check / Clear [11/2015 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [11/2015 - ]

NOTE:

When using the Techstream with the power switch off, connect the Techstream to the DLC3 and turn a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the Techstream and the vehicle begins. Then select the vehicle type under manual mode and enter the following menus: Body Electrical / Smart Key. While using the Techstream, periodically turn a courtesy light switch on and off at intervals of 1.5 seconds or less to maintain communication between the Techstream and the vehicle.

  1. CHECK FOR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (POWER SOURCE CONTROL)) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.

      Body Electrical > Power Source Control > Trouble Codes 

    5. Check for DTCs.
  2. CHECK FOR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (SMART KEY)) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Smart Key / Trouble Codes.

      Body Electrical > Smart Key > Trouble Codes 

    5. Check for DTCs.
  3. CHECK FOR DTC (HYBRID VEHICLE CONTROL ECU (HYBRID CONTROL)) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Hybrid Control / Trouble Codes.

      Powertrain > Hybrid Control > Trouble Codes 

    5. Check for DTCs.
  4. CLEAR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (POWER SOURCE CONTROL)) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.

      Body Electrical > Power Source Control > Clear DTCs 

    5. Clear the DTCs.
  5. CLEAR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (SMART KEY)) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Smart Key / Trouble Codes.

      Body Electrical > Smart Key > Clear DTCs 

    5. Clear the DTCs.
  6. CLEAR DTC (HYBRID VEHICLE CONTROL ECU (HYBRID CONTROL)) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Hybrid Control / Trouble Codes.

      Powertrain > Hybrid Control > Clear DTCs 

    5. Clear the DTCs.
scientia non olet · About LEMON Manuals