Component Operating Range
C12FA
| All of the following conditions are met | - |
| Skid control ECU (brake booster with master cylinder assembly) state | Normal |
| Command to main relay | On |
| Brake system voltage 1 (VM1) | Higher than 6.92 V |
| Power supply for linear solenoid | 3.5 V or more |
C12FB (CASE 1)
| All of the following conditions are met | - |
| Skid control ECU (brake booster with master cylinder assembly) state | Normal |
| Command to main relay | Off |
| Power supply for linear solenoid | Less than 3.5 V |
C12FB (CASE 2)
| All of the following conditions are met | - |
| Skid control ECU (brake booster with master cylinder assembly) state | Initial check |
| Command to main relay | Off |
| Power supply for linear solenoid | Less than 3.5 V |