| Monitor runs whenever the following DTCs are not stored |
None |
| All of the following conditions are met |
- |
| Soak time |
7 hours or more |
| Auxiliary battery voltage |
10.5 V or higher |
| Time after engine start |
67 seconds or more |
| Either of the following conditions is met |
(a) or (b) |
| (a) Minimum intake air temperature after engine start |
-10°C (14°F) or higher |
| (b) Engine coolant temperature before engine start |
-10°C (14°F) or higher |
| Engine coolant temperature sensor circuit fail (P0117, P0118, P0125) |
Not detected |
| Intake air temperature sensor circuit fail (P0112, P0113) |
Not detected |
| Mass air flow meter circuit fail (P0102, P0103) |
Not detected |
| Soak timer fail (P2610) |
Not detected |
| Engine coolant pump circuit fail (P261B, P261C, P261D) |
Not detected |
| Accumulated time after engine coolant pump speed higher than 900 rpm |
20 seconds or more |