Installation [04/2018 - 08/2019]: Procedure

WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL ENGINE OIL TEMPERATURE SENSOR

Install a new gasket to the engine oil temperature sensor.

Using SST, install the engine oil temperature sensor to the cylinder block sub-assembly.

SST: 09817-33191

Torque: 19.6 N*m (200 kgf*cm, 14 ft.*lbf)

NOTE:

If the engine oil temperature sensor has been struck or dropped, replace it.

Connect the engine oil temperature sensor connector.

CHECK ENGINE OIL LEVEL
Refer to PROCEDURE - Step 1
INSPECT FOR ENGINE OIL LEAK
Refer to PROCEDURE - Step 6
INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY
Refer to PROCEDURE - Step 41
INSTALL NO. 1 ENGINE UNDER COVER
Refer to PROCEDURE - Step 42
INSTALL FRONT WHEEL OPENING EXTENSION PAD LH
Refer to PROCEDURE - Step 43
INSTALL FRONT WHEEL OPENING EXTENSION PAD RH
Refer to PROCEDURE - Step 44