Installation [08/2020 -]: Procedure

WARNING: This page is about a different car, the 2021 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL 4WD ECU ASSEMBLY
1. Install the 4WD ECU assembly to the instrument panel reinforcement assembly with the nut.
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
2. Connect the 4WD ECU assembly connector.
INSTALL NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY
Refer to PROCEDURE - Step 5 [08/2020 - 08/2021] , or refer to PROCEDURE - Step 5 [08/2021 -]
INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
Refer to INSTALLATION [08/2020 -]