System Description [11/2015 -]
- LIN COMMUNICATION SYSTEM DESCRIPTION
The LIN communication system is used for communication between the components in the tables below. If communication cannot be performed through LIN communication such as when there is an open or short in a communication line, the master control ECU of the relevant system will store a DTC. Refer to the table below about the communication bus lines and connected components.
HINT:
- Each component has a fail-safe function which operates in the event of a malfunction to protect the system and allow communication between other components to continue.
- In the following table, "◦" indicates that the function applies, and "-" indicates that it does not.
DOOR BUS LINESComponent Master Control LIN Communication DTC Output Function Main Body ECU (Multiplex Network Body ECU) ◦ ◦ Power Window Regulator Motor Assembly (for Driver Door) - - Power Window Regulator Motor Assembly (for Front Passenger Door) - - Power Window Regulator Motor Assembly (for Rear LH Door) - - Power Window Regulator Motor Assembly (for Rear RH Door) - - Multiplex Network Master Switch Assembly - - Sliding Roof ECU (Sliding Roof Drive Gear Sub-assembly)* - - - *: w/ Sliding Roof System
CERTIFICATION BUS LINESComponent Master Control LIN Communication DTC Output Function Certification ECU (Smart Key ECU Assembly) ◦ ◦ Hybrid Vehicle Control ECU - - ID Code Box (Immobilizer Code ECU) - -