Installation [11/2015 - ]: Procedure

1. Install the No. 2 ECM bracket to the ECM with the 2 screws.

   Torque: 4.5 N.m (46 kgf.cm, 40 in./lbf) 

1. Install the No. 1 ECM bracket to the ECM with the 2 screws.

   Torque: 4.5 N.m (46 kgf.cm, 40 in./lbf) 

1. Install the ECM with the bolt and nut.

   Bolt 

   Torque: 13 N.m (133 kgf.cm, 10 ft./lbf) 

   Nut 

   Torque: 8.0 N.m (82 kgf.cm, 71 in./lbf) 

   NOTE:

   If the ECM has been struck or dropped, replace it.

2. Install the engine wire to the No. 1 ECM bracket with the bolt.

   Torque: 8.0 N.m (82 kgf.cm, 71 in./lbf) 

3. Engage the 2 clamps.
4. Connect the 2 ECM connectors and lower the 2 levers.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   • When connecting the ECM connectors, make sure that the connecting parts of the ECM connectors are free of dirt, water or other foreign matter.
   • Be sure to securely connect the ECM connectors.

Refer to PROCEDURE - Step 2 [11/2015 - 12/2018] , or refer to PROCEDURE - Step 2 [12/2018 - ]

Refer to INITIALIZATION [11/2015 - 11/2017] , or refer to INITIALIZATION [11/2017 - 12/2018] , or refer to INITIALIZATION [12/2018 - 08/2019] , or refer to INITIALIZATION [08/2019 - 07/2020] , or refer to INITIALIZATION [07/2020 - ]