How To Proceed With Troubleshooting [11/2018 - 10/2023]: Procedure

Result

Result: 

NEXT 

See step  2

HINT: 

• In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
• Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
• The following 5 items are important points for problem analysis:

  What	Vehicle model, system name
  When	Date, time, occurrence frequency
  Where	Road conditions
  Under what conditions?	Driving conditions, weather conditions
  How did it happen?	Problem symptoms

Result

Result: 

NEXT 

See step  3

1. Measure the auxiliary battery voltage with the ignition switch off.

   Standard voltage

   11 to 14 V

   If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  4

1. Using the Techstream, check for CAN communication system DTCs.

   for HV Model:

   Refer to DIAGNOSIS SYSTEM [11/2018 - 02/2019] , or refer to DIAGNOSIS SYSTEM [02/2019 - 10/2019] , or refer to DIAGNOSIS SYSTEM [10/2019 - 06/2020] , or refer to DIAGNOSIS SYSTEM [06/2020 - 08/2020] , or refer to DIAGNOSIS SYSTEM [08/2020 - 12/2021] , or refer to DIAGNOSIS SYSTEM [12/2021 - 10/2022] , or refer to DIAGNOSIS SYSTEM [10/2022 - 10/2023]

   for Gasoline Model:

   Refer to DIAGNOSIS SYSTEM [11/2018 - 02/2019] , or refer to DIAGNOSIS SYSTEM [02/2019 - 10/2019] , or refer to DIAGNOSIS SYSTEM [10/2019 - 08/2020] , or refer to DIAGNOSIS SYSTEM [08/2020 - 12/2021] , or refer to DIAGNOSIS SYSTEM [12/2021 - 10/2022] , or refer to DIAGNOSIS SYSTEM [10/2022 - 10/2023]

   Result

   Result	Proceed to
   CAN DTCs are not output	A
   CAN DTCs are output	B

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM 

for HV Model:

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - 02/2019] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [02/2019 - ]

for Gasoline Model:

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - ]

Result: 

A 

See step  5

1. Check for DTCs.

   Body Electrical > Main Body > Trouble Codes 

   w/ Auto Wiper System:

   Body Electrical > Rain and/or Humidity Sensor > Trouble Codes 

   Result

   Result	Proceed to
   DTCs are not output	A
   DTCs are output	B

Result: 

B 

GO TO DIAGNOSTIC TROUBLE CODE CHART 

Refer to DIAGNOSTIC TROUBLE CODE CHART [11/2018 - 10/2023] 

Result: 

A 

See step  6

1. Refer to Problem Symptoms Table.

   Refer to PROBLEM SYMPTOMS TABLE [11/2018 - 08/2020] , or refer to PROBLEM SYMPTOMS TABLE [08/2020 - ] 

   Result

   Result	Proceed to
   Fault is not listed in Problem Symptoms Table	A
   Fault is listed in Problem Symptoms Table	B

Result: 

B 

GO TO PROBLEM SYMPTOMS TABLE 

Refer to PROBLEM SYMPTOMS TABLE [11/2018 - 08/2020] , or refer to PROBLEM SYMPTOMS TABLE [08/2020 - ] 

Result: 

A 

See step  7

1. Operation Check

   Refer to OPERATION CHECK [11/2018 - 08/2020] , or refer to OPERATION CHECK [08/2020 - ] 

2. Customize Parameters

   Refer to CUSTOMIZE PARAMETERS [11/2018 - 10/2023] 

3. Terminals of ECU

   Refer to TERMINALS OF ECU [11/2018 - 08/2020] , or refer to TERMINALS OF ECU [08/2020 - ] 

4. Data List / Active Test

   Refer to DATA LIST / ACTIVE TEST [11/2018 - 08/2020] , or refer to DATA LIST / ACTIVE TEST [08/2020 - 10/2023] 

5. Inspection
6. On-vehicle inspection

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  8

Result

Result: 

NEXT 

See step  9

Result

Result: 

NEXT 

END