LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2021 >> RAV4 LE, AWD >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 10 (Engine Control System (A25A-FXS) (W/ Canister Pump Module) - Diagnostic Codes (05 Of 13)) >> SFI SYSTEM (w/ Canister Pump Module) >> DTC P0335-2A: Crankshaft Position Sensor "A" Signal Stuck in Range; DTC P0335-31: Crankshaft Position Sensor "A" No Signal [02/2019 - 06/2020] >> Typical Enabling Conditions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Typical Enabling Conditions

WARNING: This page is about a different car, the 2020 Toyota RAV4 and 2019 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
ALL

Both of the following conditions are met -
Hybrid control module judge Engine running
Lost communication with hybrid vehicle control ECU assembly (U0293) Not detected
P0335 (CASE 1)

All of the following conditions are met -
Auxiliary battery voltage Higher than 6 V
Crankshaft position sensor voltage 0.3 to 4.7 V
Ignition switch On
P0335 (CASE 2)

All of the following conditions are met -
Auxiliary battery voltage Higher than 6 V
Crankshaft position sensor voltage 0.3 to 4.7 V
Starter Off
Engine speed (Top dead center) 600 rpm or higher
Engine speed (30°CA) 600 rpm or higher