Installation [08/2020 - ]: Procedure

1. Install the No. 2 ECM bracket to the ECM with the 2 screws.

   Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

1. Install the No. 1 ECM bracket to the ECM with the 2 screws.

   Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

1. Install the ECM with the 2 bolts and nut.

   Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf) 

   NOTE:

   If the ECM has been struck or dropped, replace it.

2. Connect the 3 ECM connectors and rotate the 3 levers to lock them.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   • When connecting the ECM connectors, make sure that the connecting parts of the ECM connectors are free of dirt, water and other foreign matter.
   • Be sure to securely connect the ECM connectors.

See step  2

See step  3

Refer to PROCEDURE - Step 76 [08/2020 - 12/2021] , or refer to PROCEDURE - Step 76 [12/2021 - ]

Refer to INSTALLATION [11/2018 - 10/2023] , or refer to INSTALLATION [10/2023 - ]

Refer to PRECAUTION [08/2020 - 12/2021] , or refer to PRECAUTION [12/2021 - ]