Installation [02/2019 - 08/2020]: Procedure

1. Install the No. 2 ECM bracket to the ECM with the 2 screws.

   Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

   NOTE:

   If the ECM has been struck or dropped, replace it.

1. Install the No. 1 ECM bracket to the ECM with the 2 screws.

   Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

   NOTE:

   If the ECM has been struck or dropped, replace it.

1. Install the ECM with the 2 nuts and bolt.

   Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf) 

   NOTE:

   If the ECM has been struck or dropped, replace it.

2. Install the bolt and attach the clamp.

   Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

3. Connect the 2 connectors to the ECM and push down the lever to lock it.
   NOTE:

   • When connecting the ECM connectors, make sure that the connecting parts of the ECM connectors are free of dirt, water and other foreign matter.
   • Be sure to securely connect the ECM connectors.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Refer to PROCEDURE - Step 2

Refer to PROCEDURE - Step 3

Refer to PROCEDURE - Step 4

Refer to PROCEDURE - Step 5

• w/ Canister Pump Module:

  Refer to PRECAUTION [02/2019 - 06/2020] , or refer to PRECAUTION [06/2020 - 08/2020]

• w/o Canister Pump Module:

  Refer to PRECAUTION [11/2018 - 08/2020]