Installation [02/2019 - 08/2020]: Procedure

HINT: 

Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

• w/ Canister Pump Module:

  Refer to INITIALIZATION [02/2019 - 10/2019] , or refer to INITIALIZATION [10/2019 - 08/2020]

• w/o Canister Pump Module:

  Refer to INITIALIZATION [11/2018 - 08/2020]

1. Apply a light coat of engine coolant to the O-ring of the engine coolant temperature sensor.
2. Insert the engine coolant temperature sensor to the end of the water outlet and secure it with a new clip.
   NOTE:

   • If the engine coolant temperature sensor has been struck or dropped, replace it.
   • If reusing the engine coolant temperature sensor, be sure to inspect the O-ring.
   • Make sure that the O-ring is not cracked or moved out of place when installing the engine coolant temperature sensor.
3. Connect the engine coolant temperature sensor connector.

• for 2WD:

  Refer to INSTALLATION [11/2018 - 08/2020]

• for AWD:

  Refer to INSTALLATION [02/2019 - 06/2020] , or refer to INSTALLATION [06/2020 - ]

1. Apply a light coat of engine coolant to the O-ring of the No. 2 engine coolant temperature sensor.
2. Install the No. 2 engine coolant temperature sensor to the water outlet with a new clip.
   NOTE:

   • If the No. 2 engine coolant temperature sensor has been struck or dropped, replace it.
   • If reusing the No. 2 engine coolant temperature sensor, be sure to inspect the O-ring.
   • Make sure that the O-ring is not cracked or moved out of place when installing the No. 2 engine coolant temperature sensor.
3. Connect the No. 2 engine coolant temperature sensor connector.

See step  2

See step  3

Refer to PROCEDURE - Step 58

Refer to REPLACEMENT [02/2019 - 12/2021]

Refer to PROCEDURE - Step 1