Installation [11/2018 - 02/2019]: Procedure

WARNING: This page is about a different variant/trim than selected.

INSTALL ENGINE COOLANT TEMPERATURE SENSOR
HINT:

Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

Refer to INITIALIZATION [11/2018 - 08/2020]
1. Apply a light coat of engine coolant to the O-ring of the engine coolant temperature sensor.
2. Insert the engine coolant temperature sensor to the end of the water outlet and secure it with a new clip.
  NOTE:
  - If the engine coolant temperature sensor has been struck or dropped, replace it.
  - If reusing the engine coolant temperature sensor, be sure to inspect the O-ring.
  - Make sure that the O-ring is not cracked or moved out of place when installing the engine coolant temperature sensor.
3. Connect the engine coolant temperature sensor connector.
INSTALL INVERTER WITH CONVERTER ASSEMBLY
Refer to INSTALLATION [11/2018 - 08/2020]
ADD ENGINE COOLANT
Refer to REPLACEMENT [11/2018 - 02/2019]
INSPECT FOR COOLANT LEAK
Refer to PROCEDURE - Step 1