| U0100-87 |
Lost Communication With ECM/PCM "A" Missing Message |
3 seconds after the ignition switch is turned to ON, a communication error between the ECM and the forward recognition camera is detected for approximately 1 second or more. |
CAN communication system |
| U0101-87 |
Lost Communication with TCM Missing Message |
3 seconds after the ignition switch is turned to ON, a communication error between the hybrid vehicle control ECU and the forward recognition camera is detected for approximately 5 second or more. |
CAN communication system |
| U0126-87 |
Lost Communication with Steering Angle Sensor Module Missing Message |
3 seconds after the ignition switch is turned to ON, a communication error between the steering sensor and the forward recognition camera is detected for approximately 1 second or more. |
CAN communication system |
| U0129-87 |
Lost Communication with Brake System Control Module Missing Message |
3 seconds after the ignition switch is turned to ON, a communication error between the No. 2 skid control ECU (brake actuator assembly) and the forward recognition camera is detected for approximately 1 second or more. |
CAN communication system |
| U0293-87 |
Lost Communication with Hybrid Powertrain Control Module Missing Message |
3 seconds after the ignition switch is turned to ON, a communication error between the hybrid vehicle control ECU and the forward recognition camera is detected for approximately 1 second or more. |
CAN communication system |