Customize Parameters [11/2018 - 12/2021]
- CUSTOMIZE LANE CONTROL SYSTEM (w/ Lane Centering Function) NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
- Customizing with the multi-information display
- Turn the ignition switch to ON.
- Select the setting by referring to the table below.
- Change the settings of the LTA using the steering pad switch assembly.
HINT:
Each item is displayed on the "Setting" tab on the multi-information display.
LTA SETUPDisplay Content Setting Default Lane Center Lane centering function On/Off On Steering Assist Lane departure alert steering control function On/Off On Sensitivity Timing of lane departure alert High/Standard High Sway Warning Sway warning function On/Off On Sway Sensitivity Sway warning sensitivity High/Standard/Low Standard HINT:
Some of lane control functions are available only when other functions are operating or available. Refer to the following table.
Vehicle-to-vehicle distance control (with full-speed range following function) LTA Main Switch Customize Setting Steering Assist Lane Center Sway Warning Lane Departure Alert Function - ◦ - - - Lane Departure Alert Steering Control Function - ◦ ◦ - - Lane Centering Function • ◦ ◦ ◦ - Vehicle Sway Warning Function - - - - ◦ - •: System/function operating
- ◦: System/function available
- CUSTOMIZE LANE CONTROL SYSTEM (w/o Lane Centering Function) NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
- Customizing with the multi-information display
- Turn the ignition switch to ON.
- Select the setting by referring to the table below.
- Change the settings of the LDA using the steering pad switch assembly.
HINT:
Each item is displayed on the "Setting" tab on the multi-information display.
LDA SETUPDisplay Content Setting Default Steering Assist Lane departure alert steering control function On/Off On Sensitivity Timing of lane departure alert High/Standard High Sway Warning Sway warning function On/Off On Sway Sensitivity Sway warning sensitivity High/Standard/Low Standard HINT:
Some of lane departure functions are available only when other functions are operating or available. Refer to the following table.
LDA Main Switch Customize Setting Steering Assist Sway Warning Lane Departure Alert Function ◦ - - Lane Departure Alert Steering Control Function ◦ ◦ - Vehicle Sway Warning Function - - ◦ - ◦: System/function available