Customize Parameters [08/2017 - 08/2019]: Procedure

CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM

Customizing with the Techstream

HINT:

The following items can be customized.

NOTE:

After confirming whether the items requested by the customer are applicable or not for customization, perform customizing operations.
Be sure to record the current settings before customization.
When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization (Example: For the system, "the wireless function does not operate", first check that the wireless function is not set to "OFF", then perform troubleshooting).

Select the setting by referring to the table below.

WIRELESS DOOR LOCK

Display (Item)	Default	Content	Setting
Wireless Control	ON	ON/OFF of wireless door lock function	ON/OFF
Hazard Answer Back	ON	When LOCK switch on transmitter pressed, all hazard warning lights illuminate once. When UNLOCK switch pressed, all hazard warning lights illuminate twice	ON/OFF
Wireless Buzzer Resp	ON	Function that makes wireless buzzer sound for answer-back when transmitter LOCK/UNLOCK switch pressed	ON/OFF
Open Door Warning	ON	If door is not completely closed and transmitter LOCK switch is pressed, this function sounds a buzzer for 10 seconds	ON/OFF
Unlock 2 Operation	ON	Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock.	ON/OFF
Panic Function	ON	This function operates the theft deterrent system when PANIC is pressed and held for 0.8 second or more.	ON/OFF
Auto Lock Time	60s	This function controls amount of time from unlocking doors to automatic re-locking function.	30s/60s/120s
Wireless Auto Lock	ON	Function of automatically looking doors after unlocking doors with wireless key.	ON/OFF
Wireless Buzzer Vol	Level5	Wireless door lock buzzer volume	Level7/Level6/Level5/Level4/Level3/Level2/Level1/Level0
Wireless Lock Function with Doors Open	ON	Function that locks the doors if the lock switch on the door control transmitter assembly is pressed with any door open and then all of the doors are closed	ON/OFF

Customizing with the Multi-display

Turn the ignition switch to ON.
Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Door lock settings.

Select the setting by referring to the table below.

Display	Default	Content	Setting	Relevant ECU
Remote 2-Press Unlock	On	Function that unlocks driver door when unlock switch on electrical key transmitter sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is Off, pressing unlock switch once makes all doors unlock.	On or Off	Main body ECU (Multiplex network body ECU)
Auto Relock Timer	60 sec.	Function that regulates the interval between unlocking and automatic relocking of doors	Off, 30 sec., 60 sec. or 120 sec.	Main body ECU (Multiplex network body ECU)
Lock/Unlock Feedback-Lights	On	When the doors are locked by wireless operation, the hazard warning lights flash once. When the doors are unlocked by wireless operation, the hazard warning lights flash twice.	On or Off	Main body ECU (Multiplex network body ECU)
Lock/Unlock Feedback-Tone	5 bars	Wireless door lock buzzer volume	Off, 1, 2, 3, 4, 5, 6 or 7 bars	Main body ECU (Multiplex network body ECU)
Wireless Lock When Door Opened	On	Function that locks the doors if the lock switch on the electrical key transmitter sub-assembly is pressed with any door open and then all of the doors are closed	On or Off	Main body ECU (Multiplex network body ECU)