LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2021 >> Sequoia TRD Pro >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Can Communication System - Circuit Tests (2 Of 3) >> Can Communication System >> Front Camera Module Communication Stop Mode [08/2019 - ] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Camera Module Communication Stop Mode [08/2019 - ]: Description

Detection Item Symptom Trouble Area
Front Camera Module Communication Stop Mode Any of the following conditions are met:
  • Communication stop for "Front Camera Module" is indicated on the "Communication Bus Check" screen of the Techstream.

    Refer to DIAGNOSIS SYSTEM [08/2019 - ]

  • Communication system DTCs (DTCs that start with U) that correspond to "Front Camera Module Communication Stop Mode" in "DTC Combination Table" are output.

    Refer to DTC COMBINATION TABLE [08/2019 - ]

  • Forward recognition camera branch wire or connector
  • Power source circuit of forward recognition camera
  • Forward recognition camera ground circuit
  • Forward recognition camera