How To Proceed With Troubleshooting [08/2015 - ]: Procedure

Result

Result: 

NEXT 

See step  2

Standard voltage

11 to 14 V

HINT: 

If the voltage is below 11 V, recharge or replace the battery before proceeding.

Result

Result: 

NEXT 

See step  3

1. Using the Techstream, inspect the CAN communication function to ensure there are no malfunctions in the communication system.

   Refer to DTC CHECK / CLEAR [08/2015 - 08/2019] , or refer to DTC CHECK / CLEAR [08/2019 - ] 

   Result

   Result	Proceed to
   No DTCs output	A
   DTCs output	B

Result: 

B 

Go to CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - 08/2017]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2017 - 08/2019]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2019 - ] 

Result: 

A 

See step  4

1. Using the Techstream, inspect the LIN communication function to ensure there are no malfunctions in the communication system.

   Result

   Result	Proceed to
   No DTCs output	A
   DTCs output	B

Result: 

B 

Go to DIAGNOSTIC TROUBLE CODE CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2015 - 08/2017]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2017 - 08/2019]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2019 - ]  

Result: 

A 

See step  5

1. Data List/Active Test

   Refer to DATA LIST / ACTIVE TEST [08/2015 - 08/2019] , or refer to DATA LIST / ACTIVE TEST [08/2019 - ] 

2. Terminals of ECU

   Refer to TERMINALS OF ECU [08/2015 - 08/2017] , or refer to TERMINALS OF ECU [08/2017 - 08/2019] , or refer to TERMINALS OF ECU [08/2019 - ] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  6

Result

Result: 

NEXT 

END