Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory [08/2015 - 08/2019]: Procedure

1. Check the radio condition.

   OK

   Broadcast can be selected, but selection cannot be memorized.

Result: 

NG 

REPLACE NAVIGATION RECEIVER ASSEMBLY 

(Refer to REMOVAL [08/2015 - 08/2019] )

Result: 

OK 

See step  2

1. Check the number of preset channels.

   OK

   36 channels have already been preset.

Result: 

OK 

END (ONLY 36 CHANNELS CAN BE PRESET) 

Result: 

NG 

See step  3

1. Check if the battery was replaced.

   OK

   Battery was not replaced.

Result: 

OK 

REPLACE NAVIGATION RECEIVER ASSEMBLY 

(Refer to REMOVAL [08/2015 - 08/2019] )

Result: 

NG 

See step  4

1. Check if the preset channels that have been cleared can be added into memory again.

   OK

   Preset channels can be added into memory.

Result: 

OK 

END 

Result: 

NG 

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE 

(Refer to PROBLEM SYMPTOMS TABLE [08/2015 - 08/2017] , or refer to PROBLEM SYMPTOMS TABLE [08/2017 - 08/2019] )