DTC P0111: Intake Air Temperature Sensor 1 Circuit Range / Performance [08/2015 - 08/2019]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
5. Read DTCs.
   RESULT
   
   

   Display (DTC Output)	Proceed to
   P0111 and other DTCs are output	A
   P0111 is output	B

   HINT: 

   • If any DTCs other than P0111 are output, troubleshoot those DTCs first.
   • Perform "Inspection After Repair" after replacing the mass air flow meter (Refer to INITIALIZATION [08/2015 - 08/2019] ).

Result: 

A 

GO TO DTC CHART 

Refer to:

DIAGNOSTIC TROUBLE CODE CHART [08/2015 - 10/2016] , or refer to

DIAGNOSTIC TROUBLE CODE CHART [10/2016 - 08/2018] , or refer to

DIAGNOSTIC TROUBLE CODE CHART [08/2018 - 08/2019]

Result: 

B 

REPLACE MASS AIR FLOW METER 

(Refer to REMOVAL [08/2015 - ] )