LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2021 >> Sequoia TRD Pro >> Repair and Diagnosis (Single Page) >> Steering >> Steering Column >> Power Tilt & Telescopic Steering Column - Diagnostics - Introduction >> Power Tilt And Power Telescopic Steering Column System >> Customize Parameters [08/2015 - 08/2017] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters [08/2015 - 08/2017]: Procedure

  1. CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE) 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Utility / Customize Setting / Tilt & Telesco.
    5. Select the setting by referring to the table below.
      TILT & TELESCOPIC

      Tester Display Default Content Setting
      Autoaway/Return function ON ON/OFF of the auto away/return function ON/OFF
scientia non olet · About LEMON Manuals