How To Proceed With Troubleshooting [08/2015 - 08/2017]: Procedure

Result

Result: 

NEXT 

See step  2

Standard voltage

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

Result

Result: 

NEXT 

See step  3

1. Check for DTCs.

   Refer to DIAGNOSIS SYSTEM [08/2015 - 08/2017]

   Result

   Result	Proceed to
   CAN system DTC is not output	A
   CAN system DTC is output	B

   HINT: 

   When any CAN communication system DTCs are output, perform troubleshooting on the CAN communication system first.

Result: 

B 

Go to CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - 08/2017] 

Result: 

A 

See step  4

1. Check for DTCs.

   Refer to DTC CHECK / CLEAR [08/2015 - 08/2017] 

2. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [08/2015 - 08/2017] 

3. Recheck the DTCs.

   Refer to DTC CHECK / CLEAR [08/2015 - 08/2017] 

   Result

   Result	Proceed to
   DTC does not reoccur	A
   DTC reoccurs	B

Result: 

B 

Go to DIAGNOSTIC TROUBLE CODE CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2015 - 08/2017]  

Result: 

A 

See step  5

Result

Result: 

B 

See step  7

Result: 

A 

See step  6

1. Terminals of ECU.

   Refer to TERMINALS OF ECU [08/2015 - 08/2017] 

2. Data List/Active Test.

   Refer to DATA LIST / ACTIVE TEST [08/2015 - 08/2017] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  7

Result

Result: 

NEXT 

See step  8

Result

Result: 

NEXT 

END