How To Proceed With Troubleshooting [08/2017 - ]: Procedure

Result

Result: 

NEXT 

See step  2

Standard voltage

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

Result

Result: 

NEXT 

See step  3

1. Check for DTCs.

   Refer to

   DIAGNOSIS SYSTEM [08/2017 - 08/2018] , or refer to

   DIAGNOSIS SYSTEM [08/2018 - 08/2019] , or refer to

   DIAGNOSIS SYSTEM [08/2019 - ]

   Result

   Result	Proceed to
   CAN system DTC is not output	A
   CAN system DTC is output	B

   HINT: 

   When any CAN communication system DTCs are output, perform troubleshooting on the CAN communication system first.

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM. 

Refer to

HOW TO PROCEED WITH TROUBLESHOOTING [08/2017 - 08/2019] , or refer to

HOW TO PROCEED WITH TROUBLESHOOTING [08/2019 - ]

Result: 

A 

See step  4

1. Check for DTCs.

   Refer to

   DTC CHECK / CLEAR [08/2017 - 08/2019] , or refer to

   DTC CHECK / CLEAR [08/2019 - ] 

   Result

   Result	Proceed to
   DTCs are not output	A
   DTCs are output	B

Result: 

B 

GO TO DIAGNOSTIC TROUBLE CODE CHART. 

Refer to

DIAGNOSTIC TROUBLE CODE CHART [08/2017 - 08/2019] , or refer to

DIAGNOSTIC TROUBLE CODE CHART [08/2019 - ] 

Result: 

A 

See step  5

Result

Result: 

B 

See step  7

Result: 

A 

See step  6

1. Terminals of ECU.

   Refer to

   TERMINALS OF ECU [08/2017 - 08/2019] , or refer to

   TERMINALS OF ECU [08/2019 - ] 

2. Data List / Active Test.

   Refer to

   DATA LIST / ACTIVE TEST [08/2017 - 08/2019] , or refer to

   DATA LIST / ACTIVE TEST [08/2019 - ] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  7

Result

Result: 

NEXT 

See step  8

Result

Result: 

NEXT 

END