How To Proceed With Troubleshooting [08/2015 - 08/2017]: Procedure

Result

Result: 

NEXT 

See step  2

Standard Voltage

11 to 14 V

If the voltage is below 11 V, replace or recharge the battery before proceeding.

Result

Result: 

NEXT 

See step  3

1. Use the Techstream to check for normal function of CAN communication system.
   1. Perform bus check (communication malfunction DTC).
   2. Perform bus check (communication bus check).

   Result

   Result	Proceed to
   DTC is not output	A
   DTC is output	B

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - 08/2017] 

Result: 

A 

See step  4

Refer to DTC Check/Clear.

Refer to DTC CHECK / CLEAR [08/2015 - 08/2017] 

1. Check for DTC and note any codes that are output.
2. Clear the DTC.
3. Recheck for DTC. Try to prompt the DTC by simulating the original activity that the DTC suggests.

   Result

   Result	Proceed to
   DTC does not reoccur	A
   DTC reoccur	B

Result: 

B 

See step  7

Result: 

A 

See step  5

Refer to the Problem Symptoms Table.

Refer to PROBLEM SYMPTOMS TABLE [08/2015 - 08/2017] 

Result

Result: 

B 

See step  7

Result: 

A 

See step  6

1. Terminals of ECU.

   Refer to TERMINALS OF ECU [08/2015 - 08/2017] 

2. Data List/Active Test.

   Refer to DATA LIST / ACTIVE TEST [08/2015 - 08/2017] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  7

Result

Result: 

NEXT 

See step  8

Result

Result: 

NEXT 

END