| "Pre-Collision System Malfunction Visit Your Dealer" |
Pre-collision system malfunction |
C1A02 |
System returns to normal |
| C1A10 |
After system returns to normal, engine switch is turned off and then on (IG) |
| C1A11 |
After system returns to normal, engine switch is turned off and then on (IG) |
| C1A14 |
After system returns to normal, engine switch is turned off and then on (IG) |
| C1A46 |
After system returns to normal, engine switch is turned off and then on (IG) |
| C1A47 |
After system returns to normal, engine switch is turned off and then on (IG) |
| C1A4A |
System returns to normal |
| C1A4B |
System returns to normal |
| C1A50 |
System returns to normal |
| C1A63 |
System returns to normal |
| C1A69 |
After system returns to normal, engine switch is turned off and then on (IG) |
| C1AA0 |
After system returns to normal, engine switch is turned off and then on (IG) |
| C1AA8 |
After system returns to normal, engine switch is turned off and then on (IG) |
| C1AA9 |
After system returns to normal, engine switch is turned off and then on (IG) |
| C1AAE |
System returns to normal |
| U0100 |
System returns to normal |
| U0125 |
System returns to normal |
| U0126 |
System returns to normal |
| U0129 |
System returns to normal |
| U0235 |
System returns to normal |
| U023A |
System returns to normal |
| U1002 |
System returns to normal |
| "Pre-Collision System Unavailable" |
- Millimeter wave radar sensor assembly misaligned
- Millimeter wave radar sensor assembly temperature malfunction
- Millimeter wave radar sensor assembly low voltage malfunction
|
- Millimeter wave radar sensor assembly beam axis adjustment is completed or automatic beam axis learning is completed
- Millimeter wave radar sensor assembly temperature returns to normal
- Millimeter wave radar sensor assembly voltage returns to normal
|
| "Pre-Collision System Unavailable Clean Sensor" |
Foreign matter attached to millimeter wave radar sensor assembly |
Millimeter wave radar sensor assembly is cleaned |
| "Front Camera Unavailable" |
Forward recognition camera temporarily malfunctioning
- Abnormal forward recognition camera voltage
- Forward recognition camera temperature outside of operational range
|
- Forward recognition camera temperature returns to normal
- Forward recognition camera voltage returns to normal
|
| "Front Camera Unavailable Remove Debris On Windshield" |
The forward recognition camera or windshield glass within the field of view of the forward recognition camera is dirty or fogged up |
The forward recognition camera or windshield glass within the field of view of the forward recognition camera is dirty or fogged up is cleaned |