Operation Check [11/2017 - ]
- CHECK PRE-COLLISION SYSTEM SETTING
- Turn the ignition switch to ON.
- Operate the steering pad switch assembly to change the setting of PCS on the multi-information display to "On" and check that the pre-collision system turns on.
HINT:
When the ignition switch is turned to ON, the pre-collision system will automatically turn on. This can be changed through a customize setting using the Techstream.
- Operate the steering pad switch assembly to change the PCS setting to "Off" and check that the PCS warning light illuminates.
*a PCS Warning Light
- CHECK PRE-COLLISION SYSTEM SENSITIVITY SETTING
- Turn the ignition switch to ON.
- Operate the steering pad switch assembly to select Change PCS Sensitivity and check that the warning timing adjustment display on the multi-information display changes between "Far", "Mid" and "Near" accordingly.
HINT:
- The pre-collision system warning timing status remains unchanged when the ignition switch is turned off and back to ON. This can be changed through a customize setting using the Techstream.
- The default setting is "Mid".