Caution / Notice / Hint
NOTE:
- When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
- When the forward recognition camera is replaced with a new one, make sure to perform beam axis adjustment for the forward recognition camera and clear the vehicle control history for each system.
HINT:
Forward recognition camera axis alignment can be performed by using either One Time Recognition, Sequential Recognition or Driving Adjustment.
One Time Recognition: Refer to TARGET ADJUSTMENT(ONE TIME RECOGNITION) [10/2022 - ]
Sequential Recognition: Refer to TARGET ADJUSTMENT(SEQUENTIAL RECOGNITION) [10/2022 - ]
Driving Adjustment: Refer to DRIVING ADJUSTMENT [10/2022 - ]
- When the forward recognition camera is replaced, update the ECU security key.
Refer to UPDATE ECU SECURITY KEY [07/2020 - ]
- Before replacing the hybrid vehicle control ECU, refer to Registration.
Refer to REGISTRATION [12/2021 - ]
- When the hybrid vehicle control ECU is replaced, update the ECU security key.
Refer to UPDATE ECU SECURITY KEY [07/2020 - ]