LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2021 >> Venza LE >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Pre-Collision System - Diagnostic Codes >> Pre-Collision System >> DTC U0300-51: Internal Control Module Software Incompatibility Not Programmed; DTC U0300-57: Internal Control Module Software Incompatibility Invalid / Incompatible Software Component [07/2020 - 10/2022] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0300-51: Internal Control Module Software Incompatibility Not Programmed; DTC U0300-57: Internal Control Module Software Incompatibility Invalid / Incompatible Software Component [07/2020 - 10/2022]: Procedure

  1. CHECK FOR DTC (Hybrid Control) 
    1. Check the DTCs.

      Powertrain > Hybrid Control > Trouble Codes 

      HINT: 

      If the pre-collision system outputs U0300-51 or U0300-57, hybrid control system DTCs may also have been output. Check the hybrid control system first.

      OK

      Hybrid control system DTCs are not output.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    GO TO HYBRID CONTROL SYSTEM. Refer to  DIAGNOSTIC TROUBLE CODE CHART [07/2020 - ] 

    Result: 

    OK 

    See step  2

  2. CHECK FOR DTC (HEALTH CHECK) 
    1. Using the GTS, perform the Health Check.
    2. Check for DTCs.

      OK

      ECUs other than the forward recognition camera do not output specification information mismatch DTCs related to the hybrid vehicle control ECU.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    REPLACE HYBRID VEHICLE CONTROL ECU. Refer to  REMOVAL [07/2020 - 10/2022] 

    Result: 

    OK 

    See step  3

  3. READ VALUE USING GTS (Pre-Collision System) 
    1. Read the Data List according to the display on the GTS.

      Body Electrical > Pre-Collision System > Data List 

      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Vehicle Information (Powertrain Type) Vehicle information (powertrain type) Unknown, Conv, S&S, HV, PHV, EV, 1Motor HV, FCV - -

      Body Electrical > Pre-Collision System > Data List 

      Tester Display
      Vehicle Information (Powertrain Type)

      HINT: 

      • When the specification stored by the forward recognition camera and the vehicle specification do not match, there is a malfunction in the specification information stored by the forward recognition camera. Therefore, replace the forward recognition camera.
      • When the specification stored by the forward recognition camera and the vehicle specification match, a hybrid vehicle control ECU with different specifications may be installed. Therefore, replace the hybrid vehicle control ECU.

      Result

      Result Proceed to
      Specification stored by the forward recognition camera and vehicle specification do not match A
      "Unknown" is displayed
      Specification stored by the forward recognition camera and vehicle specification match B

    Result: 

    REPLACE FORWARD RECOGNITION CAMERA. Refer to  REMOVAL [07/2020 - 10/2022] 

    Result: 

    REPLACE HYBRID VEHICLE CONTROL ECU. Refer to  REMOVAL [07/2020 - 10/2022]