Component Operating Range
U0100
| Communication status with ECM (C1-Bus) | Valid |
U0110 (CASE 1)
| Communication status with inverter with converter assembly (PL-Bus) | Valid |
U0125
| Communication status with yaw rate and acceleration sensor (airbag sensor assembly) (C1-Bus) | Valid |
U0140
| All of the following conditions are met | A, B and C |
| A. Following condition is met | 3 seconds or more |
| +BS voltage | Higher than 10 V, and 18 V or less |
| B. Following condition is met | 3 seconds or more |
| IGR voltage | Higher than 10 V, and 17.4 V or less |
| C. Communication status with main body ECU (multiplex network body ECU) (C1-Bus) | Valid |
U025E
| Communication status with No. 1 skid control ECU (brake booster with master cylinder assembly) (C1-Bus) | Valid |
U0293 (CASE 1)
| Both of the following conditions are met | - |
| Communication status with hybrid vehicle control ECU (C1-Bus) send at IGP power on | Valid |
| Communication status with hybrid vehicle control ECU (C1-Bus) send at IGR power on | Valid |
U1107
| Communication status with certification ECU (smart key ECU assembly) (C1-Bus) | Valid |
U111A
| Communication status with ECM (PL-Bus) | Valid |
U1150 (CASE 1)
| Both of the following conditions are met | - |
| Communication status with hybrid vehicle control ECU (PL-Bus) send at IGP power on | Valid |
| Communication status with hybrid vehicle control ECU (PL-Bus) send at IGR power on | Valid |