April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [12/2021 - ]

NOTE:

When DTC is output, be sure to confirm and record.
When using the GTS with the ignition switch off, connect the GTS to the DLC3 and turn a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the GTS and the vehicle begins. Then select the vehicle type under manual mode and enter the following menus: Body Electrical / Smart Key. While using the GTS, periodically turn a courtesy light switch on and off at intervals of 1.5 seconds or less to maintain communication between the GTS and the vehicle.

CHECK FOR DTC
1. Connect the GTS to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the GTS on.
4. Enter the following menus: Body Electrical / Smart Key / Trouble Codes.
  Body Electrical > Smart Key > Trouble Codes
5. Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.
  Body Electrical > Power Source Control > Trouble Codes
6. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
  Powertrain > Hybrid Control > Trouble Codes
7. Check for DTCs.
  Refer to DIAGNOSTIC TROUBLE CODE CHART [12/2021 - ]
HINT:
- When any DTC is not output and security indicator light does not blink, problems may be caused by the following:
  - Open in TC circuit between DLC3 connector and related ECU
  - Malfunction of related ECU
CLEAR DTC
1. Connect the GTS to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the GTS on.
4. Enter the following menus: Body Electrical / Smart Key / Clear DTCs.
  Body Electrical > Smart Key > Clear DTCs
5. Enter the following menus: Body Electrical / Power Source Control / Clear DTCs.
  Body Electrical > Power Source Control > Clear DTCs
6. Enter the following menus: Powertrain / Hybrid Control / Clear DTCs.
  Powertrain > Hybrid Control > Clear DTCs
7. Clear the DTCs.