LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2021 >> Venza LE >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System - Diagnostics - Introduction >> Power Window Control System >> Customize Parameters [07/2020 - ] >> Customize Parameters [07/2020 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters [07/2020 - ]

  1. CUSTOMIZE POWER WINDOW CONTROL SYSTEM 

    HINT: 

    The following items can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Customizing with the GTS
      1. Connect the GTS to the DLC3.
      2. Turn the ignition switch to ON.
      3. Turn the GTS on.
      4. Enter the following menus: Customize Setting / Power Window.
      5. Select the setting by referring to the table below.

        Power Window 

        Tester Display Description Default Setting ECU
        Door Key P/W Up Function Function to close the power windows using the mechanical key Disable $00:Disable,$01:Enable Main body ECU (Multiplex network body ECU)
        Door Key P/W Down Function Function to open the power windows using the mechanical key Disable $00:Disable,$01:Enable Main body ECU (Multiplex network body ECU)
        P/W Down W/ Transmit Function Function to open the power windows using the key Disable $00:Disable,$01:Enable Main body ECU (Multiplex network body ECU)
        P/W Operation Buzzer W/ Transmit Function Function to turn the wireless power window buzzer response on or off Enable $00:Disable,$01:Enable Main body ECU (Multiplex network body ECU)
        D Window Auto Up Function to enable or disable the auto up function for the driver door power window using the multiplex network master switch assembly. ON 0:OFF, 1:ON Power window regulator motor assembly (for Driver Door)
        P Window Auto Up Function to enable or disable the auto up function for the front passenger door power window using the power window regulator switch assembly ON 0:OFF, 1:ON Power window regulator motor assembly (for Front Passenger Door)
        RR Window Auto Up Function to enable or disable the auto up function using the rear power window regulator switch assembly (for RH door) ON 0:OFF, 1:ON Power window regulator motor assembly (for Rear RH Door)
        RL Window Auto Up Function to enable or disable the auto up function using the rear power window regulator switch assembly (for LH door) ON 0:OFF, 1:ON Power window regulator motor assembly (for Rear LH Door)
        P Window Auto Up From Driver Function to enable or disable the remote auto up function for the front passenger door power window using the multiplex network master switch assembly ON 0:OFF, 1:ON Power window regulator motor assembly (for Front Passenger Door)
        RR Window Auto Up From Driver Function to enable or disable the remote auto up function for the rear RH door power window using the multiplex network master switch assembly ON 0:OFF, 1:ON Power window regulator motor assembly (for Rear RH Door)
        RL Window Auto Up From Driver Function to enable or disable the remote auto up function for the rear LH door power window using the multiplex network master switch assembly ON 0:OFF, 1:ON Power window regulator motor assembly (for Rear LH Door)
        D Window Auto Down Function to enable or disable the auto down function for the driver door power window using the multiplex network master switch assembly ON 0:OFF, 1:ON Power window regulator motor assembly (for Driver Door)
        P Window Auto Down Function to enable or disable the auto down function for the front passenger door power window using the power window regulator switch assembly ON 0:OFF, 1:ON Power window regulator motor assembly (for Front Passenger Door)
        RR Window Auto Down Function to enable or disable the auto down function using the rear power window regulator switch assembly (for RH door) ON 0:OFF, 1:ON Power window regulator motor assembly (for Rear RH Door)
        RL Window Auto Down Function to enable or disable the auto down function using the rear power window regulator switch assembly (for LH door) ON 0:OFF, 1:ON Power window regulator motor assembly (for Rear LH Door)
        P Window Auto Down From Driver Function to enable or disable the remote auto down function for the front passenger door power window using the multiplex network master switch assembly ON 0:OFF, 1:ON Power window regulator motor assembly (for Front Passenger Door)
        RR Window Auto Down From Driver Function to enable or disable the remote auto down function for the rear RH door power window using the multiplex network master switch assembly ON 0:OFF, 1:ON Power window regulator motor assembly (for Rear RH Door)
        RL Window Auto Down From Driver Function to enable or disable the remote auto down function for the rear LH door power window using the multiplex network master switch assembly ON 0:OFF, 1:ON Power window regulator motor assembly (for Rear LH Door)
      6. Enter the following menus: Customize Setting / Warning.
      7. Select the setting by referring to the table below.

        Warning 

        Tester Display Description Default Setting ECU
        Window Open Warning Function Function to enable or disable the window open warning Enable $00:Disable,$01:Enable Main body ECU (Multiplex network body ECU)
        Proposal Services Function Function to enable or disable the display of a message for suggestion service function ON $00:OFF,$01:Parked,$03:ON Main body ECU (Multiplex network body ECU)
      8. Enter the following menus: Customize Setting / Others.
      9. Select the setting by referring to the table below.

        Others 

        Tester Display Description Default Setting ECU
        Power Window Voice Control Function Function to enable or disable door window open/close linked voice recognition control.* Enable $00:Disable,$01:Enable Main body ECU (Multiplex network body ECU)
        1. *: w/ Body Device Voice Recognition Function
    2. Customizing with the multi-display
      1. Turn the ignition switch to ON.
      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Convenience Services.
      3. Select the setting by referring to the table below.
        Display Description Default Setting Relevant ECU
        Convenience Services Function to enable or disable the display of a message for suggestion service function On Off/Parked/On Main body ECU (Multiplex network body ECU)
scientia non olet · About LEMON Manuals