Customize Parameters [08/2016 - ]
WARNING: This page is about a different car, the 2018 Toyota Corolla, 2017 Toyota Corolla, 2016 Toyota Corolla, 2015 Toyota Corolla, and 2014 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- CUSTOMIZE POWER WINDOW CONTROL SYSTEM
HINT:
The following items can be customized.
NOTE:- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Customizing with the Techstream
- Connect the Techstream to the DLC3.
- Turn the engine switch to ON.
- Turn the Techstream on.
- Enter the following menus: Customize Setting / Power Window.
- Select the setting by referring to the table below.
Power Window
Tester Display Description Default Setting ECU D Window Auto Up Function to enable or disable the auto up function for the driver door power window using the power window regulator master switch assembly. ON 0:OFF, 1:ON Power window regulator motor assembly (for Driver Door) D Window Auto Down Function to enable or disable the auto down function for the driver door power window using the power window regulator master switch assembly ON 0:OFF, 1:ON Power window regulator motor assembly (for Driver Door)