LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2022 >> Corolla XLE >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Occupant Classification System - Diagnostics - Introduction (Model Code: ZRE172)) >> Occupant Classification System >> DTC Check / Clear [08/2013 - ] >> DTC Check / Clear [08/2013 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [08/2013 - ]

WARNING: This page is about a different car, the 2018 Toyota Corolla, 2017 Toyota Corolla, 2016 Toyota Corolla, 2015 Toyota Corolla, and 2014 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. DTC CHECK 
    1. Turn the ignition switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the ignition switch to ON, and wait for at least 10 seconds.
    4. Turn the Techstream on.
    5. Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.

      Body Electrical > Occupant Detection > Trouble Codes 

    6. Check for DTCs by following the prompts on the Techstream screen.

      HINT: 

      Refer to the Techstream operator's manual for further details.

  2. DTC CLEAR 
    1. Turn the ignition switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the ignition switch to ON, and wait for at least 10 seconds.
    4. Turn the Techstream on.
    5. Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.

      Body Electrical > Occupant Detection > Clear DTCs 

    6. Clear the DTCs by following the prompts on the Techstream screen.

      HINT: 

      Refer to the Techstream operator's manual for further details.

scientia non olet · About LEMON Manuals