Cancel Code [11/2021 - ]
- OPERATION
Body Electrical > Back and Side RADAR(LH) > Trouble Codes
Body Electrical > Back and Side RADAR(RH) > Trouble Codes
- LIST
Code Item Contents of diagnosis B2320 Rear RADAR Low Voltage (less than 9V) Temporarily stops because the voltage supplied to blind spot monitor sensor drops below 9 V. Returns to normal when the voltage becomes normal. B2321 Rear RADAR High Voltage (more than 16V) Temporarily stops because the voltage supplied to blind spot monitor sensor rises to or above 16 V. Returns to normal when the voltage becomes normal. B2328 Rear RADAR internal failure (RADAR misalignment) Deviation of the blind spot monitor sensor axis prevents normal detection. Returns to normal when the radar axis becomes normal.
When B2328 is frequently detected, perform "Diagnostic Procedure with Cancel Code".
: Refer to DTC B2328: RADAR ASSY B&S internal failure (RADAR misalignment) [11/2021 - 12/2023] , or refer to DTC B2328: RADAR ASSY B&S internal failure (RADAR misalignment) [12/2023 - ]B2340 RADAR ASSY B&S out of operation temperature range Temporarily stops because the temperature is outside the operative range (-40°C (-40°F) to 85°C (185°F)). Returns to normal when the ambient temperature falls within the operative range. B2341 Rear RADAR degradation of detecting performance Temporarily stops because some obstacles blocked blind spot monitor sensor waves. Returns to normal when the transmission and reception of radar signals becomes normal.