LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2022 >> GR86 Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Information >> Crankshaft Position Sensor >> Removal [11/2021 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [11/2021 - ]: Procedure

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    Refer to PROCEDURE - Step 1
  2. DISCONNECT TRANSMISSION WIRE (for Automatic Transmission) 
    1. GTY1142415Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. SEPARATE WATER BY-PASS PIPE SUB-ASSEMBLY 
    1. GTY1142217Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE CRANKSHAFT POSITION SENSOR 
    NOTE:

    To prevent the water by-pass pipe sub-assembly from being damaged or loose, pay careful attention while moving the water by-pass pipe sub-assembly.
    1. GTY1160283Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals