Diagnostic Trouble Code Chart [08/2019 - ]
HINT:
If a trouble code is displayed during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to "See information" below.
| DTC Code | Detection Item | Suspected Part | See information |
|---|---|---|---|
| B2221 | Jam Protection Pulse Sensor Circuit on Back Door | - Back door power window regulator motor assembly - Back door ECU - Harness or connector |
Refer to DTC B2221: Jam Protection Pulse Sensor Circuit on Back Door [08/2019 - ] |
| B2311 | Power Window Motor Malfunction | - Power window regulator motor assembly - Battery disconnection when engine switch on (IG) - Incorrect installation of power window components - Overheated power window regulator motor assembly |
Refer to DTC B2311: Power Window Motor Malfunction [08/2019 - ] |
| B2312 | Power Window Switch Malfunction | - Power window regulator master switch assembly - Power window regulator switch - Power window regulator motor assembly - Harness or connector - Power window regulator master switch assembly held in same position for more than 20 seconds - Power window regulator switch assembly held in same position for more than 20 seconds |
Refer to DTC B2312: Power Window Switch Malfunction [08/2019 - ] |
| B2313 | Glass Position Initialization Incomplete | - Power window regulator motor assembly - Power window regulator motor assembly not initialized |
Refer to DTC B2313: Glass Position Initialization Incomplete [08/2015 - ] |