Inspection [12/2022 - ]: Procedure
- INSPECT KNOCK CONTROL SENSOR
- Measure the resistance according to the value(s) in the table below.
*a Component without harness connected
(Knock Control Sensor)Standard Resistance
Tester Connection Condition Specified Condition Result D58-1(EKNK) - D58-2(KNK1) 25°C (77°F) 120 to 280 kΩ kΩ - If the result is not as specified, replace the knock control sensor.
- Measure the resistance according to the value(s) in the table below.