When the Driver's Switch is Operated, the Passenger's Side Power Window does not Work in Remote Operation [11/2021 - ]: Procedure

1. Turn the ignition switch to ON.
2. Operate the power window regulator switch assembly and check that the power window (passenger's side) works in automatic operation.

   Does the power window operate automatically according to switch operation?

   Result	Proceed to
   YES	A
   NO	B

Result: 

B 

PERFORM THE DIAGNOSIS FOR "WHEN THE PASSENGER'S SWITCH IS OPERATED, THE PASSENGER'S SIDE POWER WINDOW DOES NOT WORK IN AUTOMATIC OPERATION". Refer to  When the Passenger's Switch is Operated, the Passenger's Side Power Window does not Work in Automatic Operation [11/2021 - ]  

Result: 

A 

See step  2

1. Using the GTS, read the DTCs of [Power Window (Switch)] and [Power Window (Passenger)].

   Body Electrical > Power Window (Switch) > Trouble Codes 

   Body Electrical > Power Window (Passenger) > Trouble Codes 

   Are any DTCs displayed?

   Result	Proceed to
   YES	A
   NO	B

Result: 

A 

PERFORM THE DIAGNOSIS FOR THE DISPLAYED DTCS. 

Result: 

B 

See step  3

1. Using the GTS, check the following items in the [Data List] of [Power Window (Passenger)].

   Body Electrical > Power Window (Passenger) > Data List 

   Tester Display	Measurement Item	Range	Diagnostic Note
   Remote switch	Remote switch status	OFF DOWN UP UP/DOWN AUTO AUTO DOWN AUTO UP UP/DOWN/AUTO	-

   Body Electrical > Power Window (Passenger) > Data List 

   Tester Display
   Remote switch

   Does the display change corresponding to the switch operation?

   Result	Proceed to
   YES	A
   NO	B

Result: 

A 

REPLACE THE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY. Refer to  REMOVAL [11/2021 - ] 

Result: 

B 

REPLACE THE POWER WINDOW REGULATOR MOTOR ASSEMBLY RH. Refer to  REMOVAL [11/2021 - ]