How To Proceed With Troubleshooting [11/2021 - ]: Procedure

1. Ask the customer when and how the trouble occurred using the Check List for Interview.

   Did you interview the customer?

   Result	Proceed to
   Yes	A
   No (Perform the interview, and Go to 2.)	B

Result: 

B 

See step  2

Result: 

A 

See step  2

1. Perform basic inspection.

   Refer to BASIC INSPECTION [11/2021 - ] 

   Is the check result OK?

   Result	Proceed to
   Yes	A
   No (Repair the faulty part found in basic inspection, and Go to 3.)	B

Result: 

B 

See step  3

Result: 

A 

See step  3

1. Using the GTS, read the DTCs and cancel codes of [Back and Side RADAR(RH)] or [Back and Side RADAR(LH)].

   Body Electrical > Back and Side RADAR(LH) > Trouble Codes 

   Body Electrical > Back and Side RADAR(RH) > Trouble Codes 

   Is any DTC or cancel code displayed? (Current code)

   Result	Proceed to
   Yes (Record the DTC, time stamp and freeze frame data, and Go to 4.)	A
   No (Perform diagnosis according to the procedures in the diagnostics with phenomenon.)	B

Result: 

B 

PERFORM DIAGNOSIS ACCORDING TO THE PROCEDURES IN THE DIAGNOSTICS WITH PHENOMENON. Refer to  PROBLEM SYMPTOMS TABLE [11/2021 - ]  

Result: 

A 

See step  4

1. Perform the diagnosis for the displayed DTCs or cancel codes. (Perform the diagnosis for the side that displayed DTCs or cancel codes.)

   DTC: Refer to DIAGNOSTIC TROUBLE CODE CHART [11/2021 - ] 

   Cancel codes: Refer to CANCEL CODE [11/2021 - ] 

2. Repair or replace the cause of trouble.
3. Using the GTS, perform the clear memory of [Back and Side RADAR(RH)] or [Back and Side RADAR(LH)].

   Body Electrical > Back and Side RADAR(LH) > Clear DTCs 

   Body Electrical > Back and Side RADAR(RH) > Clear DTCs 

4. Execute the inspection mode.

   Refer to OPERATION CHECK [11/2021 - ] 

5. Using the GTS, read the DTCs or cancel codes of [Back and Side RADAR(RH)] or [Back and Side RADAR(LH)].

   Body Electrical > Back and Side RADAR(LH) > Trouble Codes 

   Body Electrical > Back and Side RADAR(RH) > Trouble Codes 

   Is any DTC or cancel code displayed? (Current code)

   Result	Proceed to
   Yes (Repeat step 4 until DTC is not shown. Go to 4.)	A
   No (Finish the diagnosis.)	B

Result: 

A 

REPEAT STEP 4 UNTIL DTC IS NOT SHOWN. 

Result: 

B 

PERFORM THE INSTRUCTED PROCEDURES 

Finish the diagnosis.