Customize Parameters [11/2018 - 12/2021]

CUSTOMIZE PRE-COLLISION SYSTEM

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Make a note of the current settings before customizing.

Customizing with the multi-information display

HINT:

The following PCS functions and the pre-collision system sensitivity setting can be changed from their default setting.

Change pre-collision system settings by operating steering pad switch.

SETTINGS

Customize Setting	Description	Default	Setting
PCS	Function that turns the pre-collision system on or off	On	On or Off
Sensitivity	Function that selects the warning sensitivity of the pre-collision function	Middle	Early, Middle or Far

Customizing with the Techstream

Select the setting by referring to the table below.

Others

Tester Display	Description	Default	ECU
PCS Function ON/OFF State Stored	Refer to the table below	Not Stored	Forward recognition camera
PCS Warning Timing State Stored 1	Refer to the table below	Not Stored	Forward recognition camera
PCS Warning Timing State Stored 2	Refer to the table below	Stored	Forward recognition camera
PCS Warning Timing State Stored 3	Refer to the table below	Not Stored	Forward recognition camera

MEASUREMENT ITEM

Customize Setting	Description	Setting
PCS Function ON/OFF State Stored	Function to maintain the pre-collision system on/off setting when the ignition switch is turned to ON from off.	Not Stored: Pre-collision system always turns on Stored: Pre-collision system maintains previous setting
PCS Warning Timing State Stored 1	Function to set whether or not to store the warning sensitivity setting when the PCS function is turned from off to on while the ignition switch is ON.	Not Stored: Sensitivity setting is reset to Middle Stored: Sensitivity settings are maintained as previous value
PCS Warning Timing State Stored 2	Function to set whether or not to store the warning sensitivity setting when the PCS function is on and the ignition switch is turned from off to ON.	Not Stored: Sensitivity setting is reset to Middle Stored: Sensitivity settings are maintained as previous value
PCS Warning Timing State Stored 3	Function to set whether or not to store the warning sensitivity setting when the PCS function is off and the ignition switch is turned from off to ON.	Not Stored: Sensitivity setting is reset to Middle Stored: Sensitivity settings are maintained as previous value